|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
| Tapping |
Home >
Tapping > UNIFED THREAD TAPS > COMBO TAPS
|
 |
|
|
|
|
SPIRAL POINT COMBO TAP FOR MULTI-PURPOSE WITH INTERNAL COOLANT
|
|
|
|
|
|
|
|
 Spiral Point Combo Tap for Multi-Purpose with Internal Coolant |
| Size |
|
TPI |
Limit |
OAL |
Thread
Length |
Shank
Dia. |
Square
Size |
Square
Length |
No. of
Flute |
Bright Finish |
TiN Coated |
| (D) |
|
|
(L) |
(Lt) |
(d) |
(k) |
(kl) |
(N) |
EDP No. |
EDP No. |
| 1/4 | - | 20 | UNC | GH5 | 2.500 | .591 | .255 | .191 | .312 | 3 | TB405 | TB405N |
| 1/4 | - | 28 | UNF | GH4 | 2.500 | .591 | .255 | .191 | .312 | 3 | TB424 | TB424N |
| 5/16 | - | 18 | UNC | GH5 | 2.719 | .669 | .318 | .238 | .375 | 3 | TB445 | TB445N |
| 5/16 | - | 24 | UNF | GH4 | 2.719 | .669 | .318 | .238 | .375 | 3 | TB464 | TB464N |
| 3/8 | - | 16 | UNC | GH5 | 2.938 | .748 | .381 | .286 | .438 | 3 | TB485 | TB485N |
| 3/8 | - | 24 | UNF | GH4 | 2.938 | .748 | .381 | .286 | .438 | 3 | TB504 | TB504N |
| 7/16 | - | 14 | UNC | GH5 | 3.156 | .866 | .323 | .242 | .406 | 3 | TB525 | TB525N |
| 7/16 | - | 20 | UNF | GH5 | 3.156 | .866 | .323 | .242 | .406 | 3 | TB545 | TB545N |
| 1/2 | - | 13 | UNC | GH5 | 3.375 | .984 | .367 | .275 | .438 | 3 | TB565 | TB565N |
| 1/2 | - | 20 | UNF | GH5 | 3.375 | .984 | .367 | .275 | .438 | 3 | TB585 | TB585N |
| 9/16 | - | 12 | UNC | GH5 | 3.594 | .984 | .429 | .322 | .500 | 3 | TB605 | TB605N |
| 9/16 | - | 18 | UNF | GH5 | 3.594 | .984 | .429 | .322 | .500 | 3 | TB625 | TB625N |
| 5/8 | - | 11 | UNC | GH5 | 3.812 | 1.083 | .480 | .360 | .562 | 3 | TB645 | TB645N |
| 5/8 | - | 18 | UNF | GH5 | 3.812 | 1.083 | .480 | .360 | .562 | 3 | TB665 | TB665N |
| 3/4 | - | 10 | UNC | GH5 | 4.250 | 1.201 | .590 | .442 | .688 | 3 | TB705 | TB705N |
| 3/4 | - | 16 | UNF | GH5 | 4.250 | 1.201 | .590 | .442 | .688 | 3 | TB725 | TB725N |
| 7/8 | - | 9 | UNC | GH6 | 4.688 | 1.339 | .697 | .523 | .750 | 3 | TB746 | TB746N |
| 7/8 | - | 14 | UNF | GH6 | 4.688 | 1.339 | .697 | .523 | .750 | 3 | TB766 | TB766N |
| 1" | - | 8 | UNC | GH6 | 5.125 | 1.496 | .800 | .600 | .812 | 3 | TB786 | TB786N |
| 1" | - | 12 | UNF | GH6 | 5.125 | 1.496 | .800 | .600 | .812 | 3 | TB806 | TB806N |
|
|
 |
|
